|
Use of a Hub is only available for use with the
1/2 T1 plan. You will be
assigned up to three (3) separate IP Addresses for your home network. CableONE.Net
does not support LANS / Networks the following is for informational purposes only.
|
|
supported connection
|
 |
|
Step ONE:
|
Power down and turn off your Computer (this also includes other Computers).
Leave the Hub powered on. |
|
Step TWO:
|
Physically unplug the power from the Cable Modem. (Even if your Cable Modem
has a power button unplug the power cord.) |
|
Step THREE:
|
After the lights go out on the Cable Modem, count to five and then plug in the power
to the Cable Modem. (Do not power up any other device.) |
|
Step FOUR:
|
Wait until the "Cable Light" goes solid on your Cable Modem. (Depending on your
brand of Cable Modem you may not have designated "Cable Light".) |
|
Step FIVE: |
Turn on ONE computer. |
|
Step SIX: |
Open your browser and follow the instructions on the screen. |
|
After completing Step SIX and you still have additional computers |
|
Step SEVEN: |
Turn on SECOND or THIRD computer. |
|
Step EIGHT: |
Open your browser and follow the instructions on the screen. (You will be adding
this device to your existing account.) |
|
Step NINE: |
If necessary go back to Step SEVEN. |
|
|
|
DISCLAIMER: CableONE.Net does not support LANS / Networks. CableONE.Net does not offer
educational support. CableONE.Net does not endorse any particular product. CableONE.Net
does not support any of the fore mentioned software, or does not imply any warranty
and or product satisfaction. CableONE.Net does not offer educational / technical support
for third party equipment. For Further assistance please contact the Router / LAN
device manufacturer. |
