help.cableone.net

Motorola SBG900 Wireless Cable Modem Gateway

	Motorola SBG900 Wireless Cable Modem Gateway Support
	Motorola SBG900 Wireless Cable Modem Gateway User manual
	Motorola Cable Modem USB Drivers

SBG900 Security Setup
Printable Security Setup Instructions Or Recieve assistance on setting up security by contacting our Cable ONE Solutions Center
General Setup Note
	It is highly recommended that all setup operations are done though a wired Ethernet connection between the cable modem gateway and a computer.
	Changing the Password
	Changing the ESSID and WEP Configuration

	Windows XP Wireless Setup

Motorola Tech Support
Phone 877-466-8646

LED

Flashing

POWER

None

The power supply is working properly

RECEIVE

Scanning for a receive (downstream) channel connection

The downstream channel is connected

SEND

Scanning for a send (upstream)
channel connection.

The upstream channel is connected

ONLINE

Scanning for a network
connection

The startup process is complete and the SBG900 is online

PC/ACTIVITY

Transmitting or receiving data

A device, such as a computer or hub, is connected to the USB or Ethernet connectors on the back panel.

WIRELESS

Wireless activity

Wireless feature is functioning normally

During normal operation, the Power, Receive, Send, and Online lights are on and the PC/Activity light flashes when the cable modem is transferring data.

Resetting the SBG900 Cable Modem Gateway to factory defaults

With a paper clip, push in and hold down the reboot/reset button for more than 20 seconds.