| Installation of a Digital Receiver |
|
 |
|
| Follow these directions and you should be able to install your digital receiver – quickly and easily – in about thirty minutes. Before you start, make sure you have a 75-ohm coaxial cable and a Cable ONE digital receiver. If you lack either of these, contact us. |
|
|
|
| How to connect your digital receiver to your TV: |
|
| Step 1: |
| Disconnect the cable from your TV that runs from the wall outlet. |
|
| Step 2: |
| Connect that cable to the digital receiver. |
|
| Step 3: |
| Connect the cable that came with your digital receiver to your TV. |
|
| Step 4: |
| Wait 20 minutes for the digital receiver to configure itself and load the program schedule.(To ensure your cable connections work the best, tighten all connectors 1/8th turn beyond hand tight with a small wrench.) |
|
 |
|
| How to connect your digital receiver to your TV and your VCR: |
|
| Step 1: |
| Connect the cable from the wall to “CABLE IN” on the digital receiver. |
|
| Step 2: |
| Connect the video output on the digital receiver to “CABLE IN” on the VCR. |
|
| Step 3: |
| Connect “CABLE OUT” on the VCR to “CABLE IN” on the TV. |
|
| Step 4: |
| Wait 20 minutes for the digital receiver to configure itself and load the program schedule. |
|
 |
|
| For more custom installation instructions, please review the following digital receiver manuals and your television manufacturer’s instructions: |
|
